Download our Athens Bin Enclosure Suite Brochure
Although they may not be cheaper than other bin enclosures on the market, they are the most cost-effective solution over time. The careful design and manufacture of the Athens bin enclosure suite ensures sustainability and the longest lasting units on the market. Also, with a modular design, it allows for individual panels to be replaced if they are damaged. Other brands of bin enclosures would require the whole bin to be replaced which would be a great expense that could be avoided by purchasing an Athens bin enclosure.
There are also coloured chute and door options that distinctively show the different waste separation streams. This includes Red for Waste, Yellow for Recycling and Blue for Paper & Cardboard. It is important with bins that are accessible from all 4 sides, that appropriate signage and coloured are also visible from all 4 sides.
We can also custom colour a complete bin which makes for very obvious waste separation.
Any bin with a cover does also reduce the likeliness of birds finding their way inside the bin and getting to the rubbish. These include the curved cover, and the sloping cover options.
Area Safe
Athens Wheelie Bin Enclosure |
Alternative
Alternative Wheelie Bin Enclosure |
---|---|
Heavy duty stainless steel hinges
1
|
Light duty chrome hinges
|
100% Australian made
2
|
Imported from Asia
|
Heavy duty quarter turn camlock – can be customised
3
|
Low quality tri-lock lock
|
Wide and long striker to stop door bowing
or becoming uneven 4
|
Small striker tabs that cause the door to bow and become
loose, eventually breaking |
Heavy 2mm wall thickness, Zincanneal sheet
& premium powder coat finish 5
|
Imported 1.6mm steel, no anti-corrosion coatings, low quality
powder coat |
No-weld, modular construction – complete base unit has
no welds. Sides can be individually replaced if required 6
|
Welded or riveted construction – weak, easily damaged, any
damage will require the complete bin to be replaced |
3-fold corner sections – extra strong
7
|
Single fold and rivet construction – weak, easily damaged
|
3mm thickness covered top
8
|
2mm thickness covered top – easily bent, sags
|
Heavy duty steel waste & recycling chutes, supported
by heavy duty posts – can be fitted after install too 9
|
Plastic or light duty steel chute with no inner support.
|
No covered top overhang
– can create ‘bank’ of multiple bins 10
|
Some tops over hang the base meaning it can
only be used as a single bin |
All-in-one slider, no grooves, very easy to clean
11
|
Drop in riveted slider that collects rubbish, dust and
is used to butt-out cigarettes. Very hard to clean |
20mm covered top posts
12
|
Maximum 12mm posts, weak and causes covered top to droop
|
Multiple shapes & styles
13
|
Limited options available
|
Standard or custom signage printed in-house
14
|
Signage by others can be a hassle
|