Area Safe
Athens Wheelie Bin Enclosure |
Alternative
Alternative Wheelie Bin Enclosure |
---|---|
Heavy duty stainless steel hinges
1
|
Light duty chrome hinges
|
100% Australian made
2
|
Imported from Asia
|
Heavy duty quarter turn camlock – can be customised
3
|
Low quality tri-lock lock
|
Wide and long striker to stop door bowing
or becoming uneven 4
|
Small striker tabs that cause the door to bow and become
loose, eventually breaking |
Heavy 2mm wall thickness, Zincanneal sheet
& premium powder coat finish 5
|
Imported 1.6mm steel, no anti-corrosion coatings, low quality
powder coat |
No-weld, modular construction – complete base unit has
no welds. Sides can be individually replaced if required 6
|
Welded or riveted construction – weak, easily damaged, any
damage will require the complete bin to be replaced |
3-fold corner sections – extra strong
7
|
Single fold and rivet construction – weak, easily damaged
|
3mm thickness covered top
8
|
2mm thickness covered top – easily bent, sags
|
Heavy duty steel waste & recycling chutes, supported
by heavy duty posts – can be fitted after install too 9
|
Plastic or light duty steel chute with no inner support.
|
No covered top overhang
– can create ‘bank’ of multiple bins 10
|
Some tops over hang the base meaning it can
only be used as a single bin |
All-in-one slider, no grooves, very easy to clean
11
|
Drop in riveted slider that collects rubbish, dust and
is used to butt-out cigarettes. Very hard to clean |
20mm covered top posts
12
|
Maximum 12mm posts, weak and causes covered top to droop
|
Multiple shapes & styles
13
|
Limited options available
|
Standard or custom signage printed in-house
14
|
Signage by others can be a hassle
|