As carparks are always full of a mix of vehicles, pedestrians and building fixtures, there are many areas that need bollard protection.
An in-ground bollard needs a little more work. The in-ground bollard will need to be cut or grinded down to ground level. Then core drill around the steel post in the ground to remove the in-ground section of the bollard. To fill the hole, grout or concrete the hole in.
Area Safe steel bollards are essential for separating pedestrians from vehicles and for protecting property. Bollards are a legal requirement for accessible parking shared zones and for preventing obstruction of fire egress doors. Standard powder coat colour is safety yellow - other colours made to order (please enquire).
Area Safe Premium bollards | Alternative Bollards |
---|---|
Galvanised Pressure Fit
Cap Powdercoated Yellow 1
|
Mild Steel, Loose Cup
|
25mm Red Reflective
Strip - Class 1 Reflective 2
|
No Reflective
|
Premium Powdercoated
Safety Yellow, Gloss 3
|
Rough Finish Powdercoat
|
Hot Dip Galvanised
4
|
No Galvanising, Mild Steel
|
Blasted Alloy Steel
5
|
Mild Steel, Corrosive
|
5mm Heavy Wall
6
|
3mm Lightweight Wall
|
Continuous post avoids
base plate warping 7
|
Warped Base Plate, weaker
construction |
Laser Cut Base Plate,
Opening & Fixing Holes 8
|
Inconsistent Hole Sizes
& Positions |
300mm Diameter,
10mm Thick Base Plate 9
|
3mm-6mm Lightweight
Base Plate |
Neat and Strong
3mm CFW Electronic Weld 10
|
Manual Welds, with splatter
|